Owners of private homes will certainly encounter the issue of heating their homes. Everyone is trying to choose an option that allows you to heat the room with high quality, while consuming the minimum amount of fuel.
Many owners of suburban real estate and country houses are attracted by the steam heating scheme, in which steam is able to heat the room in a matter of minutes. Before deciding to equip such a system, it is necessary to study the features of its work, to compare all the pros and cons.
We will help to understand these issues. And also we will describe different schemes of steam heating, we will give the calculation procedure and the rules of the system.
Steam heating: schemes and features of the device
Without a heating system, life in a country house in the autumn, spring and, especially, winter months is impossible. Often for the cottages, periodically visited by the owners, choose the option of steam heating.
It is able to provide very fast heating of the whole house, which will pleasantly please the owner and his guests, who decided to spend a weekend in the country.
Image Gallery
Photo from
The operation of steam heating is to transfer heat generated during the transition of steam into a liquid state of aggregation
Since the volume of the condensate is 400 - 1500 times less than the volume of the steam, the cross section of the steam lines should be as much as the cross-section of the condensate collectors
For the preparation of the coolant, all types of boilers are used, capable of heating the medium to a temperature of + 130º
To enhance the heat transfer effect in steam heating circuits, it is customary to use devices with an increased heat transfer area or with a slowed down cooling process, for example, cast-iron
According to the type of condensate movement into the boiler, the steam circuits are divided into closed and open, are open and closed, two- and one-pipe
The steam heating circuit, which involves the accumulation of condensate in a condensate tank with its subsequent transfer to the boiler, is called open. If the condensate flows by gravity immediately into the tank, then the system is called closed
For normal operation of the devices, it is necessary that it receives such an amount of steam that can be freely discharged in a condensed state. The appliance must be completely filled with steam to prevent the formation of air jams.
If less than the volume of steam that could normally condense at a given heat load flows into the heating device, the lower part of the radiator will be filled with air not displaced from it, as the heaviest medium compared to steam
The specifics of steam heating
Steam lines and condensate lines
Heat transfer boilers
Increased heat transfer area
Variant of a steam heating device
Open steam heating system
Principal features of steam heating
It is convenient to arrange steam heating in houses rarely visited by the owners. All thanks to the features of the coolant circulating through the pipes. This is a pair that appears only when the boiler is operating.
Indeed, when no one is in the country, and the street frost is -15 ° C or more, you don’t have to worry that the pipes will burst, as is the case with a water coolant.
Residential homes lose a certain amount of heat. Moreover, to replenish it, a different amount of energy will be required. This indicator depends on the region of residence (+)
Steam heating has its advantages:
- a large amount of heat released during condensation;
- require a smaller area of heat emitters in the room;
- quick start and stop of the system;
- saving money on heating;
- frost resistance.
As for the amount of heat released in the process of steam condensation, it is many times higher than the heat given off by the heated water circulating in the heating system.
1 kg of steam at a temperature of 130 ° C during condensation releases energy equal to 2300 kJ / kg. As for the volume, the condensate takes up 400-1500 times less space than the same mass of steam.
Copper pipes can be used for steam heating, if the family budget can pull their high cost
This feature allows the use of pipes of smaller diameter. In small rooms, you can do without batteries - the heat emitted by the pipe will be enough to heat them.
Another feature is the rapid heating of the room. Conveniently, when you get out of town for a few hours, you don’t have to deal with heating for a long time. The saved time can be used for more pleasant hassles, for example, frying a kebab and chatting with friends for a longer time.
Due to the specifics of the coolant, you can use pipes of a special design - finned or ribbed
Leaving the dacha in the cold season, you do not need to spend time on preserving the heating system, draining water and other activities designed to protect the system from failure.
In the absence of fuel in the steam boiler, steam does not enter the steam line. Accordingly, there is no water in the condensate line. Therefore, there will be no problems with freezing the system.
Ribbed pipes can be made in the form of a register, which is used instead of radiators
Disadvantages of a steam heating system
Steam heating, in addition to its advantages, also has disadvantages.
Firstlyhigh degree of danger. This is due to the specifics of the coolant.
When steam goes through the pipe under pressure, then:
- when breaking the steam line, it can seriously injure a person;
- if you accidentally touch the surface of the pipe or battery, it is easy to get a burn;
- improper use of heavy-duty equipment can explode.
Secondly, baking dust falling on the surface of the steam pipe. Under the influence of high temperature, dust particles decompose. The products of their decay negatively affect the residents of the house, especially if there are allergic people among them.
It is convenient to use copper pipes for the steam line. But working with them is difficult - you will need soldering skills or an expert in this field
Thirdly, the dry air that all the inhabitants of the home are forced to breathe. To improve the indoor climate, you have to choose a humidifier. This is an additional expense item, which should be provided even at the stage of designing the heating system.
Fourth, the temperature of the coolant is simply impossible to regulate and reduce at will. This drawback creates many difficulties when using a steam heating system in homes with permanent residence.
The way out of this situation is the laying of several branches of the steam pipeline with their subsequent inclusion in the work as necessary.
Touching steam heating pipes is dangerous - you can easily get a burn
Fifthly, it is necessary to use special steam fittings designed for working with steam. The same applies to the material of pipes and radiators.
It should be borne in mind that the service life of the condensate pipeline will be much shorter when compared with water heating, where return pipes from the same material are installed. This is especially true for dry condensate pipelines.
At sixthcare should be taken to ensure proper wall decoration. After all, paper wallpapers do not have the required level of heat resistance. Cement plaster painted with appropriate paint is suitable here.
One of the heat-resistant materials is asbestos sheet. They can be used to wall the walls to protect the combustible material from the effects of the high temperature of the steam pipe
Another interesting option is loft-style decoration. For this, the inner surface of the wall, along which the steam pipe will pass, can be laid out from heat-resistant bricks. This will not only create a unique atmosphere, but also protect residents when a hot pipe affects the wall material.
Loft style involves the use of industrial attributes in conjunction with luxurious pieces of furniture
Seventh, the need for equipment for the boiler room. It is not permissible to place the steam boiler in the living room. It is very dangerous. The location of the boiler must be equipped with heat-resistant materials and well ventilated.
Among heat-resistant materials, manufacturers offer a wide variety of bricks. You can choose the desired color and shade that fits perfectly into the interior
Steam Heating Schemes
The heating option using steam as a heat carrier has a variety of schemes.
They can be classified by the following parameters:
- system pressure;
- a way to communicate with the atmosphere;
- pipe connection diagram;
- condensate return method.
The pressure in a functioning steam heating system can be high and lower.
Depending on its absolute value, the following systems are distinguished:
- low pressure - less than 0.7 kgf / cm2;
- high pressure - more than 0.7 kgf / cm2;
- vacuum steame - less than 1 kgf / cm2.
The first option is recommended for domestic use. Special boilers designed for steam heating, allow you to implement a low pressure system in a private house or in the country. They can operate on various types of fuel - coal, wood, gas, fuel oil.
It is important for a steam boiler to equip a separate room to protect all family members from possible dangers
The second option is dangerous for use at home. To work with high pressure systems, appropriate knowledge and specialization are required. If an unprepared craftsman decides to collect high-pressure steam heating in his country house, then he risks staying, at best, without a cottage.
A high pressure boiler is large and very expensive. This option is used in industry. But many home craftsmen experimentally try to implement a similar installation with their own hands. This option is extremely dangerous to use in the heating system.
For houses and cottages, household boilers that produce steam are used. These are low pressure units (+)
The vacuum-steam system differs from the first two by the presence of an air collector and an additional device that ensures the evacuation of the entire internal space.
Depending on the method of connecting with the atmosphere, open and closed steam heating circuits are distinguished. In the first case, the system has a connection with the atmosphere - it is open. In the second, it is completely isolated from atmospheric pressure and air from the environment.
The one-pipe scheme for steam heating is no different from the water system, except for the diameter of the piping for steam and condensate
According to the method of piping tracing, software schemes are:
- horizontal single pipe;
- vertical two-pipe.
The former are used, as a rule, in one- and two-story houses and structures with ceiling heights of up to 2.7 m and an area of up to 80 m2where you do not need to adjust the temperature. The second are more suitable for the implementation of a steam heating system in buildings with 3 or more floors.
The two-pipe scheme is effective in houses with a large number of floors and a large heated area
Moreover, software systems can be mounted:
- with upper, middle or lower wiring;
- with wet or dry piping for condensate movement;
- with deadlock or associated movement of both steam and condensate.
The condensate return method allows you to select a closed and open circuit. In the first case, the water formed in the condensation process is directed by gravity to the boiler. In this case, it is imperative that the recommended slope of the steam and condensate pipelines be maintained - from 1.0 to 0.5 cm slope per 1 meter.
Moreover, the bias is correctly done in the direction of steam movement for the steam line and in the direction of condensate movement for the return pipe. The boiler itself with this scheme must be located below the level of the return pipe.
The scheme of the steam boiler plant with open networks involves the use of water recharge using pumps. Explanations: 1 - mains pump, 2 - make-up pump, 3 - water tank, 4 - back-up regulator, 5 - source water pump, 6 - cooler, 7 - water heater, 8 - filter, 9 - condensate tank, 10-condensate pump, 11 - purified water heater, 12 - deaerator, 13 - steam separator, 14 - feed pump, 15 - steam boiler, 16 - reduction and cooling unit, 17 - mains water heater, 18 - condensate cooler for network water heaters (+)
In the circuit of an open steam heating system there is a special tank for collecting condensate - a tank. From it, with the help of a pump, liquid can be sent to the boiler or removed from the heating system. In the second case, the boiler must be constantly fed with fresh water for the continuous formation of steam.
It is preferable for a country house to choose a closed steam heating circuit with an upper wiring and a wet condensate pipe, i.e. the entire volume of the channel filled with water. For open circuits, a dry pipeline variant is used for partially moving condensate filled condensate.
The diameters of the pipeline for the collection and movement of condensate can be selected using reference information for designers (+)
How to calculate the steam system correctly
Having chosen the steam system, it is necessary to draw up a project of its location in the building and perform preliminary calculations.
There are two options:
- to calculate the main components of steam heating on their own;
- Seek help from a professional designer.
The second way to resolve this issue is most preferable. After all, only a specialist, having more than one successfully implemented project for arranging a heating system, is able to take into account all the wishes of the owner, not forgetting the regulatory requirements.
If there is no possibility and desire to contact the designer, you can proceed with the independent calculation of the steam heating system. You can use the standards and useful recommendations from the specialized literature, for example, from the designer’s guide.
To calculate, you have to take the plan of your house and calculate the area that you want to heat. Then mark the location of the radiators.
When steam heating is often used instead of the battery registers made of galvanized or finned tubes. They may have a design
Radiators are selected depending on the required power. Moreover, it is important to consider the technical characteristics of the device you like - it must withstand the load when working with steam.
Cast-iron radiators are best not to be used in a steam heating device of a rarely visited cottage. Having stood cold for a long time, they can not cope with a sharp heat and burst.
A comparative review of different heating radiators and recommendations for their choice are given in this article.
It is best to calculate the length of the steam and condensate piping while in the room itself. So it’s more convenient to plan the height of their gaskets and the location of the radiators, if necessary.
For steam heating, metal pipes made of galvanized steel or copper can be used.
After calculating the required number of linear meters of the pipe, do not forget about steam fittings - valves, tees, if necessary - steam traps, a pump.
To determine the power of the steam boiler, it will be necessary to calculate the volume of all heated rooms and multiply this figure by the indicator of the required amount of energy for heating 1 m3. This indicator depends on the region of residence. So, for the European part, the figure is 40 watts.
You can calculate the boiler capacity for a 3-room house with a ceiling height of 2.6 m.
First you need to calculate the area of individual rooms:
- 1st room: 5 * 2.95 = 14.75 m2;
- 2nd room: 3 * 2.45 = 7.35 m2;
- 3rd room: 2 * 5.4 = 10.8 m2.
Then you have to calculate the volume of the whole house: 14.75 * 2.6 + 7.35 * 2.6 + 10.8 * 2.6 = 38.09 + 19.11 + 28.08 = 57.02 m3.
Now the resulting volume must be multiplied by the heat demand: 57.02 * 40 W = 2288 W. To the obtained value it is necessary to add a power reserve of at least 20%: 2288 * 1.2 = 2745.6 W or about 3 kW.
The second option for determining power is by area. It is conditionally accepted that for heating every 10 m2 1 kW of boiler power + 30% of the reserve is required if the ceiling height does not exceed the permissible level of up to 2.7 m.
Moreover, you need to buy the unit 20-30% higher than the calculated power size. In practice, experts advise taking a boiler no less than 30% more powerful so that it does not work to the limit of its forces.
Only a certified unit can be used for steam heating. Taking a home-made boiler is very dangerous - you can seriously suffer from an explosion
Choose a steam boiler from a trusted manufacturer. The unit must have a certificate of quality and a guarantee of the plant that produced it. The steam boiler must be equipped with a safety valve. Also, temperature and pressure monitoring devices and a pressure reducer will be required to normalize the pressure, if necessary.
Errors with steam heating
Being engaged in the device of individual heating, it is necessary to carefully study the existing options.
To choose for your home ownership is the most suitable option in order to further receive:
- economical fuel consumption;
- efficient heating;
- convenience of system maintenance;
- long service life of the equipment.
Stopping among all the options for heating on steam, it is important to try to avoid mistakes made during its construction.
Firstly, most often, home owners believe that water is the coolant in the system. This is not true. When heated by steam, it will be steam that flows through pipes and batteries.
Proceeding from this, it is necessary to choose the right material for the reinforcement with which the steam and water obtained during condensation will come into contact.
To avoid burns during the operation of steam heating, it is better to provide protection for radiators
Secondly, even at the stage of designing the heating system, they forget to provide protection for batteries and pipes. Steam moving through a steam line has a temperature of 100 ° C. It heats all structural elements sufficiently strong, which is dangerous for residents of the house / cottage.
Thirdly, when installing the steam and condensate pipelines, novice masters forget to foresee a bias towards the movement of steam and water, respectively.
Fourth, Some home craftsmen incorrectly select the power of the boiler. As a result, instead of the desired room temperature, + 13-15 ° C is obtained. For daily comfortable living, such a temperature regime is clearly not enough.
FifthlyInexperienced welders can make a mistake when welding a steam pipe. As a result, at any time, the pipe can burst and the steam flow, moving under pressure through it, will rush directly at a person who is nearby. This is an extremely dangerous situation, the possibility of which should not be forgotten.
When developing the layout of the heating system, one must not forget about the correct outline of the doorways (+)
All these errors are likely with an independent arrangement of the heating system. Wanting to save money and choosing the option with steam, the owners decide to cope on their own, deciding not to contact a professional designer, welder and other specialists.
Lack of personal practical experience and a frivolous attitude to the process can interfere with the proper installation of steam heating. Some of the mistakes made during installation can not only disrupt the usual way of life, but also seriously harm the health of those living in the house.
Video material about the device of the steam boiler:
A clip on how to weld pipes:
Visual video about the features of mounting and soldering copper pipes:
Steam heating video:
Detailed video about the operation of the steam boiler:
After reviewing the positive and negative aspects of steam heating, you can decide whether this option is suitable to meet the needs of a particular home ownership.
If you decide to use steam heating, then you have to choose the most optimal scheme for your home. To calculate the heating system, it is better to contact specialists in order to protect yourself and the household.
If you have experience heating a house using a steam heating system, please share this information with our readers. Leave comments on the article and ask questions in the form below.