Lovers of tinkering will always find application in their own strength, patience and waste materials. Of the almost free components, they can easily build an extremely useful thing in everyday life.
For example, they can make an effective Frenett heat pump with their own hands without spending anything. But they will replenish the store of knowledge and stock of skills, and this is priceless, is it not so?
The information provided will help to understand the principle of operation of the unit. With our help, you can determine the design and find out how the model is made. Clear instructions for the production of this type of heat pump will effectively help independent home craftsmen.
We provide practical recommendations for the production of productive home-made products and tips on the operation of such equipment.
The principle of operation of the device
Those who come into contact with issues of cost-effective heating, the name "heat pump" is well known. Especially in combination with terms such as land-water, water-water, or air-water, etc.
Such a heat pump with a Frenett device has practically nothing in common. In addition to the name and the final result in the form of thermal energy, which is ultimately used for heating.
Carnot-based heat pumps are very popular both as a cost-effective way of organizing heating and as an environmentally friendly system.
The operation of such a complex of devices is associated with the accumulation of low potential energy contained in natural resources (earth, water, air), and its conversion into heat energy with a high potential.
Eugene Frenett’s invention is arranged and works in a completely different way.
Image Gallery
Photo from
Appearance of the Frenett Heat Pump
Warming up the device during operation
The main structural components
The actual dimensions of one of the models
The principle of operation of this device is based on the use of thermal energy, which is released during friction. The design is based on metal surfaces located not close to each other, but at a certain distance. The space between them is filled with liquid.
Parts of the device are rotated relative to each other using an electric motor, the fluid inside the housing and in contact with the rotating elements is heated.
The resulting heat can be used to heat the coolant. Some sources recommend using this fluid directly for the heating system. Most often, a conventional radiator is attached to a home-made Frenett pump.
As a coolant for the heating system, experts strongly recommend using oil, not water.
During the operation of the pump, this fluid tends to heat up very much. Water in such conditions can simply boil. Hot steam in an enclosed space creates excessive pressure, and this usually leads to rupture of the pipes or casing. Using oil in this situation is much safer, because its boiling point is much higher.
To make a Frenett heat pump, you will need an engine, a radiator, several pipes, a steel disk lock, steel disks, a metal or plastic rod, a metal cylinder and a wrench set (+)
There is an opinion that the efficiency of such a heat generator exceeds 100% and may even be 1000%. From the point of view of physics and mathematics, this is not a completely correct statement.
Efficiency reflects the energy loss spent not on heating, but on the actual operation of the device.Rather, the phenomenal claims about the incredibly high efficiency of the Frenett pump reflect its effectiveness, which is really impressive. The cost of electricity for the operation of the device is negligible, but the amount of heat obtained as a result is very noticeable.
Heating a coolant to the same temperatures with the help of a heating element for heating, for example, would require a much larger amount of electricity, possibly tens of times more. A household heater with such an electricity consumption would not even heat up.
Why are all residential and industrial premises not equipped with such devices? The reasons may be different.
Firstly, water is a simpler and more convenient heat transfer medium than oil. It does not heat up to such high temperatures, and eliminating the effects of water leaks is easier than removing spilled oil.
SecondlyBy the time the Frenett pump was invented, a centralized heating system already existed and was functioning successfully. Dismantling it for replacement with heat generators would be too expensive and would cause a lot of inconvenience, so no one even seriously considered this option. As the saying goes, the best is the enemy of the good.
Instrument Use Recommendations
It is worth noting that the variations of the Eugene Frenett pump using water as a coolant still exist. But usually these are large industrial models that are used in specialized enterprises.
The operation of such devices is strictly controlled using special devices. Providing a similar level of safety at home is almost impossible.
The general scheme of an industrial heat generator developed by Khabarovsk scientists: 1 - capacity; 2 - inlet pipe; 3 - outlet pipe; 4 - water heater; 5 - bearing shaft. Water is used as a heat carrier
The most popular version of the Frenett pump, which uses water rather than oil as the heat carrier, is a device developed by scientists from Khabarovsk: Nazyrova Natalya Ivanovna, Leonov Mikhail Pavlovich and Syarg Alexander Vasilyevich. In this mushroom-shaped structure, water is specially brought to a boil and converted into steam.
Then, the reactive force of the steam is used to increase the speed of movement of the liquid coolant along the pump channels to 135 m / min. As a result, the energy consumption for moving the coolant is minimal, and the return in the form of thermal energy is very high.
However, such an assembly must be exceptionally robust, and its operation should be constantly monitored to avoid an accident.
What to do if with the help of the Frenett pump it is supposed to organize heating of a large room or the whole house? Water is a traditional coolant; most heating systems are designed specifically for it. And filling an entire heating system with suitable liquid oil can be expensive.
This issue is solved very simply. It is necessary to additionally build a conventional heat exchanger, in which the heated oil will heat the water circulating through the heating system. At the same time, some heat will be lost, but the overall effect will remain quite noticeable.
The Frenett heat pump can be successfully used in combination with underfloor heating systems. But instead of water, you need to pour liquid oil into the pipes
An interesting idea would be to use a Frenett pump in combination with a warm floor system. At the same time, the coolant is allowed through narrow plastic pipes laid in a concrete screed.
Such a heating system functions in the same way as an ordinary water floor heating. Of course, a project of this type can only be implemented in a private house, since only high-rise electric underfloor heating is allowed for high-rise apartment buildings.
A practical and convenient way to use such a device is to heat a small room: a garage, a barn, a workshop, etc. The Frenett pump allows you to efficiently and quickly solve the problem of autonomous heating in such places.
The cost of electricity for its operation is small compared with the resulting thermal effect, and to build such an aggregate is not difficult from the simplest materials.
Frenett Pump Design Options
Eugene Frenett not only invented the device named after him, but also repeatedly improved it, coming up with newer, more efficient versions of the device.
In the very first pump, which the inventor patented in 1977, only two cylinders were used:
- outer - the hollow cylinder is larger in diameter and is in a static state
- interior - the diameter of the container is slightly smaller than the dimensions of the cavity of the outer cylinder.
The inventor poured liquid oil into the resulting narrow space between the walls of two cylinders. Of course, that part of the structure in which this liquid coolant was located was carefully sealed to prevent oil leakage.
This is a diagram of the very first version of the Frenett heat pump. The rotating shaft is located horizontally, the coolant is placed in a narrow space between two working cylinders (+)
The inner cylinder is connected to the motor shaft in such a way as to ensure its rapid rotation relative to the stationary large cylinder. A fan with an impeller was placed at the opposite end of the structure.
During operation, the oil was heated and transferred heat to the air surrounding the device. The fan allows you to quickly spread warm air throughout the room.
Since this structure was heated quite strongly, for the sake of convenient and safe use, the structure was hidden in a protective case. Of course, openings were made in the housing for air circulation.
A useful addition to the design was the thermostat, with which the operation of the Frenett pump could be automated to some extent.
The central axis in this model of the heat pump is located vertically. The engine is located below, then the cylinders nested in each other are installed, and on top is the fan. Later, a model appeared with a horizontal central axis.
A model of a Frenett heat pump with a horizontally oriented rotating shaft was used together with a heating radiator, inside of which heated oil circulated (+)
It was such a device that was first used in combination not with a fan, but with a heating radiator. The engine is placed on the side, and the rotor shaft passes through a rotating drum and goes outside.
There is no fan in this type of device. The coolant from the pump through the pipes moves to the radiator. In the same way, the heated oil can be discharged to another heat exchanger or directly to the heating pipes.
Later, the design of the fresnett heat pump was substantially changed. The rotor shaft still remained in a horizontal position, but the inner part was made of two rotating drums and an impeller placed between them. Here, liquid oil is again used as a heat carrier.
In this version of the Frenett heat pump, two cylinders rotate side by side, they are separated by a specially designed impeller made of very durable metal (+)
When this design rotates, the oil heats up additionally, as it passes through special holes made in the impeller, and then penetrates into the narrow cavity between the walls of the pump casing and its rotor. Thus, the efficiency of the Frenett pump was significantly improved.
Small holes are made along the edges of the impeller for the Frenett heat pump. The coolant heats quickly and efficiently, passing through them (+)
However, it is worth noting that this type of pump is not very suitable for manufacturing at home. First you need to find reliable drawings or calculate the design yourself, and only an experienced engineer can do it.
Then you need to find a special impeller with holes of a suitable size. This element of the heat pump works at high loads, so it must be made of very durable materials.
Self-made device
A review of the Frenett pump device options allows us to understand that the principles of its operation with one or another degree of efficiency can be used in designs of various types and types. The basic idea remains the same: a narrow space between metal elements filled with oil, and rotation with an electric motor.
The diagram shows a variant of the Frenett heat pump, which is usually used for self-manufacturing of the device. The basis of the design is metal discs separated by nuts (+)
At home, a Fresnett pump is most often made, consisting of a series of metal plates separated by a narrow clearance.
To make such a device, you need to prepare the necessary materials:
- hollow metal cylinder;
- a set of identical steel disks with a hole in the center;
- set of nuts 6 mm high;
- threaded steel rod:
- electric motor with an extended shaft;
- bearing;
- Radiator;
- connecting pipes.
Pump sizes may be larger or smaller. But the distance between the disks should be maintained exactly - 6 mm. Standard nuts are used as dividers, and the steel bar is the center of the structure.
Its thickness should correspond to the diameter of the nut. If there is no rod with a thread at hand, you just have to cut it.
The metal disks for the Frenett heat pump should be slightly smaller than the diameter of the cylindrical body to ensure free rotation and more efficient heating of the coolant
Obviously, the hole in the disks must be such that they can be freely put on the axial shaft. The outer diameter of the discs should be several millimeters smaller than the case. If there are no ready-made elements at hand, the disks are cut independently from sheet metal or entrusted with this work to a turner.
Steel discs for the Frenett heat pump can be cut at home if suitable equipment is available
The cylindrical body can be made from an old metal container of a suitable configuration or welded from metal. Cutting a wide metal pipe is also suitable.
Walls are welded to the ends of the cylinder. The housing must be tight so that oil does not leak. Additional holes should be made in the upper and lower end of the casing: for the entrance and exit of heating pipes leading to the radiator.
Of course, all pipe joints should be sealed. For threaded connections, special seals are used: FUM tape, linen, etc. If you decide to use polypropylene pipes, you will need special fittings and, possibly, a soldering iron for mounting such pipes.
A high-performance electric motor is not needed for the operation of the Fresnett pump. A device taken from an old or broken household appliance, such as a conventional fan, is suitable.
The main purpose of the electric motor is to rotate the shaft. Excessively fast rotation can cause the device to malfunction. The faster the structure rotates, the more the heat carrier heats up.
A small motor for rotating the shaft of a Frenett heat pump can be removed from damaged appliances or purchased at a store
For the shaft to rotate freely, you need a suitable bearing in standard sizes. When all the elements are ready, you can start assembling the device.First, a central axis with a bearing is mounted on the lower part inside the housing. Then, a spacer nut is screwed onto the axis, then a disk is put on, a nut again, a disk again, etc.
Discs with nuts alternate until the case is filled to the top. Even at the preparation stage, preliminary calculations can be made on the number of required discs and nuts.
It is necessary to add the thickness of the disk to the thickness of the nut (6 mm). The height of the body divided by this figure. The resulting number will give information about the required number of pairs of “nut + disk”. Install the nut last.
After the housing is filled with these moving elements, it is filled with liquid oil. The type of oil does not matter, you can take mineral, cottonseed, rapeseed or any other oil that tolerates heat well and does not harden. After that, the structure is covered with a top cover and gently brewed.
At this point, the radiator pipes are usually already attached to the covers. For convenience, during the further installation and maintenance of the device on the pipes, two stopcocks can be installed. Now you need to connect the axis of the heat pump to the motor shaft.
The system is included in the network, check for leaks, evaluate the performance of the device.
A self-made Frenett heat pump can be connected to a conventional cast-iron or bimetal radiator, which will provide the necessary heating effect
If everything is done correctly, the axis with the disks will begin to spin, warming up the oil inside the device. The hot heat carrier will move through the upper hole through the pipe to the heating radiator. Cooled oil will return to the heat pump body through the lower pipe for reheating.
To automate the operation of the system, you can use a special relay with a temperature sensor, which detects the heating of the heat pump housing and turns off the engine or turns it on as needed. This will prevent overheating of the system, damage to the electric motor and, as a whole, will increase the life of the device.
An interesting version of the Frenett pump is presented in this video:
Unfortunately, the Frenett pump did not find wide acceptance in the field of heating. Such a device for industrial production for domestic use is difficult to find in home appliance stores. But many folk craftsmen successfully used the achievements of this scientist and applied them in their homes, saunas, garages, etc.
Perhaps you are the very self-made who managed to realize the idea of Frenett? Please share your experience - leave comments on the article and add photos of your products. The contact form is located below.